Self-luminous OLED Display Module 0.23" Sony 640 x 400 dots RGB Micro Display Modules HD
Product Description
The ECX336AF is a 0.6 cm (type 0.23) diagonal, 640 (RGB) × 400 dots active matrix color OLED panel module using
single-crystal silicon transistors. This panel incorporates panel driver and logic driver, and realizes small size, light weight
and high definition.
(Applications: View finders, head mounted displays, very small monitors, etc.)
Product Details
| Screen Size | 0.23" |
| Display type | self-luminous OLED |
| Quantity | Monocular |
| Virtual screen size | 44”(3 m) |
| Resolution | 640(RGB) x 400 dots |
| FOV | 21° (Diagonal) |
| Lens thickness | 10 mm |
| Exit relief | 18 mm |
| Video signal | RGB |
| Contrast | 10000:1 |
| Power consumption | 110mW |
| Debug mode | SPI |
| Drive interface | TYPE-C |
Product Features
- Small-size, high-definition-type 0.23 nHD+ display dots 640 (RGB) × 400 = 0.77M dots
- High resolution
- High contrast
- Wide color reproduction range
- High-speed response
- Thin type and light weight
- Power-saving function
- Up/down and/or right/left inverse display function
- Orbit supported
- Input interface that supports parallel RGB 24-bit, YCbCr 24-bit and YCbCr 16-bit input
System Block Diagram
Power On Sequence
1. Set XCLR to low and turn on 1.8V power supply to initialize.
2. 1ms after completion of 1.8 V power supply rising, set XCLR to high, then the panel changes to the power-saving mode.
3. After XCLR set to high, turn on 10V power supply.
4. Implement all the register settings and perform PS register off by serial communication to cancel power-saving mode.
Then the panel changes to the normal state.
*Complete turning on of 10V power supply before power saving mode off setting, while the order of turning on of 1.8V and
10V power supply is not restricted.
Tag: flexible oled display module,micro oled display module, oled display modules.
Product Tags:
|
|
Self-luminous OLED Display Module 0.23" Sony 640 x 400 dots RGB Micro Display Modules Images
|
